MT3035NDCR 1.5MHz Synchronous Step-Down DC/DC Converter
文章出处:
人气:发表时间:2023-11-06 09:33
The MT3035NDCR is a 1.5MHz,5A constant on-time(COT)controlled synchronous step-down converter.It can operate with input voltage from 2.5V to 5.5V and provide output range from 0.6V to input level,thanks to its 100%duty cycle operation.The constant on-time control scheme simplifies loop compensation and offers excellent load transient response.
MT3035NDCR consumes extremely low 15µA quiescent current hence achieves superior light load efficiency.
The high gain error amplifier in the control loop provides excellent load and line regulation.Proprietary adaptive on-time helps MT3035 to achieve nearly constant switching frequency across load range.
MT3035NDCR has cycleby-cycle current limit and hiccup mode to protect over-load or short circuit fault conditions.
MT3035NDCR is available in low profile 10 leads DFN 3mm x 3mm packages.
MT3035NDCR FEATURES:
-Wide Input Range from 2.5V to 6V
-Proprietary Fast Transient Constant On Time
Architecture Stable with low ESR Ceramic Output
Capacitors
-+/-2%0.6V Feedback Voltage
-1.5MHz Switching Frequency
-15µA Low Quiescent Current
-4A Continuous Output Current,5A Peak
-1.21V Accurate Enable Threshold
-Up to 95%Efficiency
-100%Duty Cycle Operation
-Built-in 80mΩ/50mΩPower Switches
-Internal 1msec Soft-Start
-Cycle-by-cycle Current Limit Protection
-Over-Load and Short Circuit Hiccup Mode
-Open Drain Power Good Indication
-Output Discharge
-Thermal Shutdown Protection
-Available in Small DFN3X3_10L
-Pb-Free RoHS Compliant
MT3035NDCR APPLICATIONS:
-Solid-State and Hard Disk Drives
-WiFi RF Moudules
-Smart Phone and Tablets
-DC/DC Micro Modules
MT3035NDCR consumes extremely low 15µA quiescent current hence achieves superior light load efficiency.
The high gain error amplifier in the control loop provides excellent load and line regulation.Proprietary adaptive on-time helps MT3035 to achieve nearly constant switching frequency across load range.
MT3035NDCR has cycleby-cycle current limit and hiccup mode to protect over-load or short circuit fault conditions.
MT3035NDCR is available in low profile 10 leads DFN 3mm x 3mm packages.
MT3035NDCR FEATURES:
-Wide Input Range from 2.5V to 6V
-Proprietary Fast Transient Constant On Time
Architecture Stable with low ESR Ceramic Output
Capacitors
-+/-2%0.6V Feedback Voltage
-1.5MHz Switching Frequency
-15µA Low Quiescent Current
-4A Continuous Output Current,5A Peak
-1.21V Accurate Enable Threshold
-Up to 95%Efficiency
-100%Duty Cycle Operation
-Built-in 80mΩ/50mΩPower Switches
-Internal 1msec Soft-Start
-Cycle-by-cycle Current Limit Protection
-Over-Load and Short Circuit Hiccup Mode
-Open Drain Power Good Indication
-Output Discharge
-Thermal Shutdown Protection
-Available in Small DFN3X3_10L
-Pb-Free RoHS Compliant
MT3035NDCR APPLICATIONS:
-Solid-State and Hard Disk Drives
-WiFi RF Moudules
-Smart Phone and Tablets
-DC/DC Micro Modules
此文关键字:MT3035NDCR,1.5MHz,Synchronous,
同类文章排行
- MP9487 P2P国产替代料JW9563高压降压开关调节器
- BMS上MP9487国产完美替代型号JW5143P降压变换器
- SDC141是一款锁定型的霍尔开关集成电路_光大芯业
- SDC1181是一款锁存型霍尔开关集成电路_SDC1181规格
- SDC49E是一款线性霍尔效应传感器IC_SDC49E中文资料
- TPA1862-SR 36V, 6MHz, Zero Drift Op Amps
- MP1542DK-LF-Z电流模式升压转换器-MPS
- MP2130DG-LF-Z降压开关变换器_MP2130DG-LF-Z中文资料
- MP8765GQ-Z整流降压开关变换器_MP8765GQ-Z中文资料
- TP324-SR General Purpose, 1MHz, Micro-Power CMOS Op-Amps