[公司新闻] TPC5121 Precision ADC[ 2023-08-27 ]

The TPC5120/TPC5121 products include capacitorbased SAR A/D converters with inherent sample and hold.The TPC5120 has 16-channel single-ended inputs and the TPC5121 has 8-channel single-ended inputs.The devices accept a wide analog supply ra

[公司新闻] TPC112S4 Precision DAC|3peak[ 2023-08-27 ]

The TPC116S4/TPC112S4 are pin-compatible 16-bit and 12-bit digital-to-analog converters.These products are four-channel,low-power,buffered voltage-out DACs,which are guaranteed monotonic by design.These devices use a precision external refe

[公司新闻] TPT1043 Low-Power High-speed CAN[ 2023-08-27 ]

The TPT1043 is a CAN transceiver that meets the ISO11898 high-speed CAN(Controller Area Network)physical layer standard.The device is designed to be used in CAN FD networks up to 5 Mbps,with enhanced timing margin and higher data rates in l

[行业新闻] TPT1042 High-Speed CAN IC[ 2023-08-27 ]

The TPT1042 is a CAN transceiver that meets the ISO11898 high-speed CAN(Controller Area Network)physical layer standard.The device is designed to be used in CAN FD networks up to 5 Mbps,with enhanced timing margin and higher data rates in l

[行业新闻] TPT480 RS-485 Transceivers IC[ 2023-08-27 ]

The TPT480 and TPT482 is IEC61000 ESD protected,which support12 kV IEC contact and15 kV IEC air discharge.3.0V~5.5V transceivers that meet the RS-485 and RS-422 standards for Full Duplex communication.Transmitters in this family deliver exc

[公司新闻] TPT481 RS-485 Transceivers IC|3peak[ 2023-08-27 ]

The TPT481 are IEC61000 ESD protected,3.0V to 5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication.Transmitters in this family deliver exceptional differential output voltages into the RS-485 requir

[公司新闻] TPT75176A RS-485 Transceivers[ 2023-08-27 ]

3PEAKs TPT75176A/B is enhanced RS485 which exceeds standard TIA/EIA-485-A with12kV ESD Protected,3.0~5.5V powered,single transceiver for balanced communication.It also features the larger output voltage and higher data rate-up to 10Mbps-req

[公司新闻] TPT75176B RS485 Chip -3peak[ 2023-08-27 ]

3PEAKs TPT75176A/B is enhanced RS485 which exceeds standard TIA/EIA-485-A with12kV ESD Protected,3.0~5.5V powered,single transceiver for balanced communication.It also features the larger output voltage and higher data rate-up to 10Mbps-req

[行业新闻] TPT29306 Level Shift -3peak[ 2023-08-27 ]

The TPT29306 device is a dual bidirectional I2C and SMBus voltage-level translator with an enable(EN)input,and work from 1.2V to 3.6V VREF1 and 1.8V to 5.5V VREF2.The 3.5Ron make the minimal propagation delaylt;1.5ns.If EN is high,the trans

[公司新闻] TPA8000-SOAR Isolated Amplifier-3pekak[ 2023-08-27 ]

The device is a precision,isolated amplifier with an output separated from the input circuitry by capacitive silicon dioxide insulation barrier.This barrier is certified to provide isolation of up to 5000VRMS according to UL1577.The common

[公司新闻] TP2261-TR High Voltage OPA-3peak[ 2023-08-27 ]

Established in 2012,3PEAK was listed on the Shanghai Science and Technology Innovation Board on September 21,2020.The company is committed to the research and development of high-performance,high-quality,and highly reliable integrated circu

[公司新闻] TPV811 Low Voltage Supervisory Circuit with Manual Reset[ 2023-08-27 ]

The TPV811/812 is a supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal.A reset signal can also be asserted by an external manual reset input.The reset periods are fixed at 200 ms(typical).The

[行业新闻] TPV812 Low Voltage Supervisory Circuit with Manual Reset[ 2023-08-27 ]

The TPV811/812 is a supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal.A reset signal can also be asserted by an external manual reset input.The reset periods are fixed at 200 ms(typical).The

[公司新闻] TPV810 Low Voltage Supervisory Circuit[ 2023-08-27 ]

The TPV803/809/810 is a series of supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal.They provide a reset output during power-up,power-down,and brownout conditions.The reset timeout periods ar

[公司新闻] TPV809 Low Voltage Supervisory Circuit[ 2023-08-27 ]

The TPV803/809/810 is a series of supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal.They provide a reset output during power-up,power-down,and brownout conditions.The reset timeout periods ar

[行业新闻] TPV6823 Reset Ics with Watchdog|3peak[ 2023-08-26 ]

The TPV6823 is a supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal. It also has on-chip watchdog timer,which can give out a reset signal if the microprocessor fails to strobe watchdog timer w

[行业新闻] TPV803 Reset ICs |3peak[ 2023-08-26 ]

The TPV803/809/810 is a series of supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal.They provide a reset output during power-up,power-down,and brownout conditions.The reset timeout periods ar

[行业新闻] TPV706 Reset Ics with Watchdog|3peak[ 2023-08-26 ]

The TPV706 is a supervisory circuit that monitors power supply voltage levels and provides a poweron reset signal.A watchdog monitor is provided,which is activated if the watchdog input doesnt toggle within 1.6 sec.A reset signal can also b

[行业新闻] TPV708 Reset Ics with Watchdog|3peak[ 2023-08-26 ]

The TPV708 is a family of supervisory circuits to monitor power supply voltage levels and provides a power-on reset signal.A reset signal can be asserted by an external manual reset input.In addition,there is a power-fail detector with a 1.

[公司新闻] TPK1032 Power Sequencer |3peak[ 2023-08-26 ]

The TPK1032 series products are simple power sequencers, which provide power-up and power-down sequence control of multi-channel power supplies. Furthermore, the TPK1032 series support maximum three devices cascaded to control sequence of n