TP8485E-SR 3peak RS485

　　The TP8485E are 3V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication.Driver outputs and receiver inputs are protected against±12kV ESD strikes without latch-up.Transmitters in this family deliver exceptional differential output voltages(2.5V min/5Vcc),into the RS-485 required 54Ωload,for better noise immunity,or to allow up to eight 120Ωterminations in“star”topologies.These devices have very low bus currents so they present a true“1/8 unit load”to the RS-485 bus.This allows up to 256 transceivers on the network without using repeaters.Receiver(Rx)inputs feature a“Full Fail-Safe”design,which ensures a logic high Rx output if Rx inputs are floating,shorted,or on a terminated but undriven bus.Rx outputs feature high drive levels-typically 25mA VOL=1V(to ease the design of optocoupled isolated interfaces).The TP8485E is available in an SOIC-8 and MSOP-8 package,and is characterized from–40°C to 125°C.

 

　　Features

 

　　-Exceeds Requirements of EIA-485 Standard

 

　　-Hot Plug Circuitry-Tx and Rx Outputs Remain

 

　　Three-State During Power-up/Power-down

 

　　-Data Rate:Up to 250 kbps

 

　　-Full Fail-safe(Open,Short,Terminated)

 

　　Receivers

 

　　-Up to 256 Nodes on a Bus(1/8 unit load)

 

　　-Wide Supply Voltage 3V to 5.5V

 

　　-SOIC-8 Package for Backward Compatibility

 

　　-Bus-Pin Protection:

 

　　–±12 kV HBM protection

 

　　Applications

 

　　E-Metering Networks

 

　　Industrial Automation

 

　　HVAC Systems

 

　　Process Control

 

　　DMX512-Networks

 

　　Battery-Powered Applications